The water heater silently plays an important role in our life. We all deserve a good hot long shower after a long and tiring day and a Water heater is something that nobody wants to malfunction. Imagine standing in front of the shower and suddenly feeling the cold water on the body instead of hot. We have few geyser repair tips that are pocket friendly and quicker than calling a plumber.
Repairing water heaters could be a pain, we don't want to call the plumber and ask them to come again and again for water heater repair. To avoid that chaos, we can follow some easy, quick yet guaranteed steps that will help you avoid geyser repair.
Water Heater Repair: Common problems
1) No Hot Water- No hot water is a clear sign that there are some serious issues with the water heater and you need to repair water heater as soon as possible.
2) Little Hot Water- Some people might ignore it which they shouldn't. If you think that the heater is not warming enough water then you should get it repaired as it could lead to no hot water in the future.
3) Leaks: One must not avoid drips or sprays of water coming out from the water heater or even rust or some white-coloured deposits, this could be a serious issue and needs to be fixed at the earliest.
4) Smelly water: The bad odour originates from the bacteria growing on the sediment inside the tank. Drain and clean the tank as soon as you smell a bad odour.
5) Unusual Sounds: Sounds like loud pops are unusual and can result in being torn down to become sediment. If you hear any unusual sound, ask a plumber to check it as it might be dangerous.
What To Do When The Water Stinks?
The main reason behind the foul-smelling is bacterial decomposition or anode rod that makes the water stink very badly. Getting rid of this smell is not a tough task. Gently clean the water tank with a diluted hydrogen peroxide solution and if the water still stinks then the best option is to replace the anode rod.
Water Heater Repair Tips:
- Install heater at sufficient height: According to experts, a water heater should be installed at a height of at least 1.8 meters or 6 feet from the ground. As it empowers the pressure of water and you get warm water.
- Drain the water heater: Collect the water while draining the water heater and you can see that it will be full of sediments. If the water heater is not drained timely then, the sediment will get collected and could cause a serious issue.
- Inspect the pressure-relief valve: Checking the pressure relief valve or thermostatic mixer for clogs could help you in sensing if there's an issue in the water heater or not. You can check the pressure once a year to avoid big damage.
- Monitor water temperature: You must monitor the water temperature from time to time. The hot water temperature should be 125 degrees or lower, it should not go beyond that.
- Focus on the exhaust stack: One must look closely and make sure that the connections are safe and there is no leakage in the water heater. Also, if there's any rust or corrosion, make sure to sort that out as this can create a problem in the future.
- Old Is Not Always Gold: If your water heater is more than 10 years old then you should go for a new one as the 10-year-old unit can never compare to today's technology so you must buy a new one as it will work much more efficiently. Another major benefit of replacing the water heater will be that it'll lower the electricity bill way more than a 10 year old one.
- Examine the insulation: One must check the insulation around the unit after every few months. You must cover the water heater with insulation, particularly if the unit is older. It will not only lower the electricity bill but will also keep the water hot as the unit does not have to run much.
- Electrical Connections & wiring: Make sure that the water heater is wired to an MCB i.e., Miniature Circuit Breaker which cuts off if there is any instability in the power.
- Annual maintenance: To avoid a big problem with your heater, make sure you get regular annual checkups done. If the problem gets detected at the initial stage it can easily be rectified.
- Lower the temperature: Temperature lowering will not only save electricity but will also increase the lifespan of the geyser as the lower temperature will reach the desired temperature faster/ Apart from this, warm water will decrease the chances of accidental burns rather than hot water.
If you want to go for eco-friendly water heaters, then electric water heaters are the options to go for. A tankless water heater heats the water only when you are using it and does not operate constantly, which is an excellent way to save electricity. You can also visit the Jaquar website to find useful tips for your bathroom. You can also look at other useful fixes such as how to fix your leaking toilet which will help you save a lot on your water bills.