Floor Lamps

Filters
Sort by
  • Page 1 of 2 (20 total)
  • 1
  • 2
  • Next
  • Choose a yellow light if you’re reading for pleasure or leisure. However, if you’re reading for school or work, you should use white light.
  • Eye strain will result from a light that is too dim, as you will struggle to focus on the words you’re reading. Therefore, it is recommended to use lights with a luminous output of roughly 450 for reading. That is the same as 50 watts.
  • When we are exposed to layers of light rather than a single harsh source, our eyes feel more at ease. Therefore, when reading, you should use a more focused source of light in addition to basic overhead illumination. This lamp should be placed near you, perhaps on a nightstand, and it should be adjustable.
  • The majority of LEDs are directional, meaning they only emit light in one direction. This allows light to be cast exactly on your book while avoiding bothering others.
  • Not all lighting fixtures, such as chandeliers, lamps, and sconces, should have the same size. Otherwise, the eyes striving for visual clarity would not find it. A chandelier is a terrific focal point for ample space, such as dining or family rooms. Consider a unique floor lamp or vintage-inspired sconces flanking a piece of wall art in a smaller area.
  • Lighting should not overrun a space, but it should also not be lost. When it comes to selecting the ideal light fixtures for your room, scale is essential, and following a few rules will help you get the desired look. Any room’s length plus width in feet should equal a chandelier’s diameter in inches.
  • When it comes to lighting, layering is crucial. Every place, including the powder room or entrance, should have at least three sources of light for the most acceptable balance. To accommodate fewer square feet in tiny places, lower the light wattage and light fixture size. Just remember to use the accent layer to draw attention to the extra elements you’ve added to your rooms.
  • Dimmers can instantly transform the mood of a room while also saving you money on your electricity bill. To have additional control over your lighting, install dimmer switches in as many rooms and with as many fixtures as you want. To adjust the ambience and balance artificial and natural light, use dimmers.
  • First, identify the ideal height range for your light by sitting in the area adjacent to where the lamp will be placed. Measure from the lamp’s mounting surface to eye level. This is your starting point. Divide the base measurement by three to get the shade’s average height. Add 18 inches to the shade measurement to get the estimated size.
  • The lamp shade’s shape and appearance are significant stylistic considerations, but you should also choose a shade that complements how you’ll be using the light. For example, if you’re going to be watching TV with the design on, an opaque shade or one in a dark hue can assist reduce glare. On the other hand, a semi-opaque shade creates a warm glow for reading while also allowing for more excellent broad room illumination.

If the lamp is to be used for reading, a lamp with a wattage of 60 or higher is recommended. Choose a dimmable light for more flexibility. Finally, get your hands on the best light lamps by Jaquar.

  • You can use led strip lights and place them up, down, and across the frames. Then, bend and twist the strips in whichever way you like to decorate a space or a corner.
  • Cover outdoor frames with LED lights that will withstand rain and snow. By alternating different-coloured strips that change colours automatically, you can give your house a unique and festive look.
  • Spell out different words and phrases with tiny, flexible LED modules available at Jaquar. Ensure that your message is visible late into the night, which is assured by LEDs’ established reliability. At any time of night, the lights glow for endless hours without flickering or burning out.
  • Wrap small LED lights around trees and plants in your home. Since LED lighting is great for highlighting, invest in a good light that highlights a single garden object. From the floor to the ceiling, place these LED lights anywhere in or around the garden.
  • Kitchen: For optimal illumination, most kitchens, significantly bigger ones, will require many forms of lighting. Choose a ceiling fixture or recessed can lights that evenly disperse light across space for ambient (or overall) lighting. Then, to provide task lighting, place light sources immediately above work areas.
  • Dining Area: A chandelier can be ornamental and be utilised for providing general lighting in a dining room. In a dining room with 8-foot ceilings, a chandelier should dangle about 33 inches above the table. Add 3 inches to the above-table dimension for each foot over 8 feet.
  • Living Room: As living rooms are frequently used for a variety of activities, lighting that can readily adapt for informal entertaining, intimate movie evenings, and other activities is essential. Because it may offer ambient, job, or accent lighting, flexible track lighting is suitable for living rooms. To modify your lighting design at any time, you can move, swivel, spin, and individual aim lights.
  • Bathroom: Incorrect bathroom lighting can be unpleasant and even dangerous. Avoid using lights that aim down at the mirror since they will cast unwelcome shadows. Instead, for more balanced illumination, hang pendants or sconces on either side of the mirrors. Consider adjustable sconces for a shared bathroom.
  • Hallway: Hallways don’t have as many lighting considerations as other spaces because they serve as transition areas between rooms. For discreet illumination, choose a flush-mount ceiling fixture or a few sconces along the wall.
  • The finest colour LEDs for studying are those with cool light colours, such as blues and whites. They are designed to look like daylight, which helps to keep your mind alert and focused. Cooler hues will ensure that you study with maximum concentration.
  • From your brain’s perspective, white light is the closest thing to natural daylight. White light is made up of all light wavelengths at once, rather than just one. Blues have a similar impact, albeit at the lower end of the visible light spectrum.
  • You’ll want your lights to be bright to simulate daylight in your study or dorm. Warmer, softer lighting can induce feelings of calm, relaxation, and sleepiness. Bright lighting will keep you alert and focused, allowing you to finish your responsibilities.
  • Reds and oranges are warm colours with wavelengths on the higher end of the spectrum. Warm hues are those that your brain instinctively associates with sleep and bedtime. Warm colours with longer wavelengths elicit a reaction akin to that of a sunset or candlelight. In addition, warm hues provide a soothing environment that encourages your body to produce melatonin, the sleep hormone.
  • Long cylindrical tube lights that emit wavelengths appropriate for studying should be utilised; tube lights emit less blue light than CFL and LED but are not energy efficient.
  • The eyes are strained by CFL and LED lighting. This is because they emit blue light, which has a higher frequency than white light and hence has more penetrating strength. These frequencies can even reach your retina. Nowadays, Androids, Desktop Monitors, and other digital devices with screens come with features such as ‘Blue Light Filter,’ ‘Reading Mode,’ and ‘Dark Mode,’ all of which are designed to protect our eyes.
  • The light frequency emitted by CFLs and LEDs inhibits delta waves in the brain and induces alpha waves, resulting in a reduction in sleep time and, in some cases, no sleep at all. As a result, it is customary to refrain from using your Android or PC for at least one or two hours before going to bed. As a result, both CFL and LED are like destructive twins for our eyes and studies; it is preferable to switch to a Tube light or a unique rechargeable light source.
  • Ambient lighting, often known as low-key lighting, is a photographic technique that uses a single key light to illuminate the area. It’s a term for a particular style of lighting used in computer graphics. Ambient lighting is commonly used as the beginning point for a room’s interior design. Ambient lights make up the base amount of light.
  • Designers, engineers, and constructors have employed these lights to give their spaces a unique aesthetic. Ambient lighting can take the form of ceiling downlights, table or floor lamps, or both. For all surfaces and overall directions, the amount of ambient light is constant.
  • The light source for ambient lighting is chosen based on the user’s kind and use. You may use these lights to create a glow in the room by using soft white incandescents. Fluorescent lights can be used in big spaces such as utility rooms and garages to create a higher level of illumination.

If you want to highlight a particular architectural feature of your home, these lightings are ideal. You can use table lights to produce the best lighting effect. If you want to show off a superb piece of craftsmanship or photography, these lightings can help.

  • Ambient lighting is general lighting that uses ceiling- and wall-mounted fixtures to diffuse light evenly. If the office is an afterthought and the overhead lighting is insufficient, it is critical to improve the amount of illumination.
  • Include an adjustable clamp on the table to provide bright, focused illumination. When reading, writing, or working on the computer, use a desk lamp with dimmers to manage the light intensity.
  • It’s worth noting that task lighting improves focus and decreases eye strain, making the office more comfortable. If your desk is small and you don’t have room for a table lamp, consider a floor lamp. To avoid shadows or reflections, make sure the desk lamp or floor lamp is on one side of the desk.
  • To give your office a modern and fashionable look, add accent lighting. For example, installing a stylish pendant light above the desk or wall-mounted bracket lights to emphasise specific sections of the home office can help achieve this.
  • The ceiling of the office should be lit with track lights. Each track light can be adjusted to spotlight or enhance specific parts of the office. For example, consider using under-cabinet lighting if your office contains overhead storage cabinets. Within the base of the cabinets, put LED strip lights or energy-efficient fluorescent lighting.
  • The choice of a light hue greatly influences the kitchen’s aesthetics and functionality. Yellow to white is the most delicate colour. The colouring of the kitchen may be severely distorted if the light is too yellow. On the other hand, if the light is excessively bright, the kitchen will appear sterile, chilly, and unwelcoming.
  • 7,000-8,000 lumens is the ideal illumination for the kitchen. For the kitchen, 100-watt incandescent lights with 7,000-8,000 lumens are perfect.
  • The downlights or recessed lights should be directed toward the region where the most lighting is required. As a result, the best way is to place them over your kitchen table, stove, island, or worktops, as these places demand the most illumination.
  • In the kitchen, warm white light is preferable. These lights give out a yellowish-white glow, which is ideal for this setting. A lamp with a tint of crimson is also a good choice; they’re thought to pique appetites and spark conversation! In terms of brightness, kitchens should have between 7,000 and 8,000 lumens.
  • Astable lamps are connected to a cable with a switch; they are effortless to use. The main light switch in many ancient houses was constructed for 135 cm beds, which was the standard size a few decades ago. When you have a larger bed or even twin beds, the leading light switch may be obstructed by the larger bed. Therefore table lights are beneficial.
  • The light will shine at a specific location in the room, depending on the shape and design of the table lamp. The light from table lamps is directed downwards and upwards, with the lampshade shading the bed area. Furthermore, turning the lamp around provides a general indirect source of lighting, making the lamp a very adaptable item.
  • Table lamps have the advantage of providing a soft light that is directed just at a particular region of the bed, making them less intrusive. This way, if someone needs to get up in the middle of the night and turn on the light to fetch something from the bedroom nightstand, no one will be disturbed.
  • In certain circumstances, the table lamp is used to illuminate the room rather than for reading softly. For example, there are occasions when the younger members of the family require it due to their fear of the dark. It’s also helpful for elderly folks who don’t want to trip over something in the dark or change their clothes before bed.
  • First, identify the ideal height range for your light by sitting in the area adjacent to where the lamp will be placed. Measure from the lamp’s mounting surface to eye level. This is your starting point. Divide the base measurement by three to get the shade’s average height. Add 18 inches to the shade measurement to get the estimated size.
  • The lamp shade’s shape and appearance are significant stylistic considerations, but you should also choose a shade that complements how you’ll be using the light. For example, if you’re going to be watching TV with the design on, an opaque shade or one in a dark hue can assist reduce glare. On the other hand, a semi-opaque shade creates a warm glow for reading while also allowing for more excellent broad room illumination.

If the lamp is to be used for reading, a lamp with a wattage of 60 or higher is recommended. Choose a dimmable light for more flexibility. Finally, get your hands on the best light lamps by Jaquar.

  • Lighting is one of the most important aspects of a room. To take your living room’s lighting to the next level, consider a few factors like the colour of the wall, texture, and other factors.
  • A successful lighting design incorporates multiple light sources at various levels around the space. For a flexible area, overlay light from a variety of sources that can be used together or individually.
  • Wall lights are a perfect way to dress up an empty wall, frame a sofa, or highlight a piece of artwork. Consider a pair of eye-catching, sculptural sconces or a single light for a more minimalist design.

A Chandelier completes the living room, and you can use the piece to brighten the seating area and create a focal point. Make your living room a centre of attraction by Installing a beautiful piece. You can look out for various options available on the Jaquar site.

  • The chandelier is the most fantastic alternative for enhancing your room’s décor and adding style. Jaquar has a plethora of chandeliers varying in patterns and sizes to choose from. However, before you go out and buy a chandelier, there are a few things to consider.
  • Measure the dimensions of your room and choose a chandelier that is the perfect size for your space and looks great. You may use chandeliers in your lobby, drawing rooms, as well as little ones in your bathroom to add a different aesthetic to your space. Hence, it is essential to look out for a perfect size chandelier that goes well with your area.
  • Select a design that is appropriate for your space or the location where it will be installed. At Jaquar, You can pick from hundreds of different patterns, ranging from Meridian to Cerina.

Along with designs, shapes, sizes and patterns, it is essential to look for products that come with a warranty so that you can get them fixed if there are any problems. Products at Jaquar are good at their quality and come with warranties so that our customers can have them set in their spaces without any worries.

  • For your child’s room, the most crucial lighting consideration is safety. Choosing unbreakable lightings, such as wood or plastic, and avoiding breakable materials, such as glass or pottery, can help you avoid any unpleasant mishaps. If your child is prone to accidents, make sure that any unsecured cords are secured to the floor, the wall, or a table leg.
  • Lamps with style are a simple way to add interest to any room. Finding the ideal light is simple because there are hundreds of different sizes, styles, and designs to pick from.
  • When lighting a kid’s room, the most important thing to remember is to minimize intense lighting. Your baby’s sensitive, developing eyes may be overstimulated or even harmed by bright lights. Conversely, soft lighting reduces the contrast between light and dark, allowing your child’s eyes to relax.
  • If you’re the only one sleeping in the bed, you’ll need one nightstand lamp; if you have a companion, you’ll need two. Whether you’re the only one in the room or not, two bedside lamps provide more outstanding balance if your bedroom is spacious or you have a king-size mattress. Even if you have two bedside lights, don’t rely on them to provide all of the light in the room.
  • The width of your nightstand should be around one-third to two-thirds the width of your mattress, and the width of your bedside lamp should be roughly one-third the width of the nightstand at its broadest point.
  • You wouldn’t want the light to shine directly in your eyes or shine over your head. If your nightstand and mattress are the same height, opt for a lamp that is the same height as your nightstand plus 2 or 3 inches. For example, a roughly 27 inches tall light will look best if your nightstand is 24 inches high.
  • It is reasonably necessary to look for a lampshade that balances your lamp. Lampshades should generally be two-thirds the height of the lamp body, measured from the bottom of the lamp to the light bulb’s base. Lampshades should be twice as wide as the lamp’s most comprehensive component. Choose a lampshade that is no wider than the shade’s height if you have a fragile light. Choose yourself a bedside lamp from the wide range of lamps available at Jaquar.
  • They are substantially taller than other types of lamps and stand tall in a room. At least chest height, through eye level, or even more elevated than a standing human, the lamp head or light. For example, a floor lamp allows the light to be directed toward the ceiling or downwards over a seating or desk area by setting the light source thus high in the room.
  • Because the enhanced light helps perform activities, reading, and so on, floor lamps are frequently placed in the corner of a room or behind a sitting area. Floor lamps are commonly used as reading lamps, and some are intended expressly for this purpose.
  • When seated, set floor lamps to the side or behind you if you’re doing anything like reading. Lamps that produce a localised focused hotspot of light are ideal for this task. This can be accomplished by using a lampshade that concentrates the light and directs the majority of it downward.
  • Floor lamps for decoration, such as the conventional floor lamp with a shade, would lead you to more decorative and less functional light kinds. For example, a tiffany floor lamp shade with multicoloured art glass pieces forming a design could be used.